——Japanese NSK bearing

(Please select suitable fitting size for your air compressor)

With the  Vacuum cleaner, workshops and car detailing companies are now able to connect the tried-and-tested technology to conventional cleaning devices such as industrial vacuum cleaners.

The Vacuum cleaner combines the advantages of a pulsed suction cleaner and the Gun. By simply switching over, the Vacuum does the work of both action and vacuum. Blow the dust out of the material with the technology and vacuum it up at the same time. For normal vacuum cleaner operation, the rotation of the inner air hose can be switched off.

The machine is connected with the air source, which causes high-speed rotation (8500 turns/ minute) of the circular tube within the bell mouth of the cleaning machine with a pressure of 4-9.2bar (best working state is at pressure of 7bar). The centrifugal force as a result of the rotation evacuates the airs in the center and forms a powerful airflow to atomize the detergent. The atomized detergent is attached on the stained parts to completely separate the stain molecules from the surface of the parts. Meanwhile, the free molecules will be adsorbed on the bell mouth to achieve an outstanding pollutant removal effect and can also sterilize the bacteria inside the automobile.

Product Features:

Comprehensive cleaning, efficient and energy-saving.

Combined with aerology principles, easy and simple to use.

Two choice modes,Suitable for a variety of occasions.

The product employs the new bearing rotor design; it has a low start-up pressure and high rotational speed (up to 3000rpm), the cleaning effect is very good.

Light design of the gun body; Feel comfortable, beautiful and durable.

Product information:

Description: Vacuum Cleaner
Material: Aluminum Alloy + Plastic
Color: Blue + Black
Net Weight: about 900g
Air Pressure: 6-9.2 bar

Operating temperature: 10-40°C

Liquid: neutral (special solution)

Applicatopm Scope:

Note:

1. The working pressure is 4~9 bar(0.4-0.9Mpa); the optimal working pressure is 7bar(0.7Mpa);

2. The working pressure shall not exceed 1Mpa to avoid damaging the device;

3. Wash the inside with water after each use to prevent blocking of the pipe;

4. Upon receiving the product, rotate the bearing gently to avoid jamming.