Heavy Duty Garden Hose Nozzle Spray Gun High Pressure Adjustable Water Spray for Car Wash Garden Watering Pet 3/4" GHT

(No reviews yet) Write a Review
€25.19
Width:
15.00 (cm)
Height:
7.00 (cm)
Depth:
34.00 (cm)
Adding to cart… The item has been added

Product Overview

SPECIFICATIONS


Alt / Search Aliases: hose sprayer, hose end sprayer, power washer wand attachment

Battery Included: no

Brand Name: suli

Car Wash Use: car wash, car washing, auto wash, vehicle wash, motorcycle wash

Choice: yes

Connection / Fit: 3/4" GHT, standard garden hose thread, female hose connector

Core Product: garden hose nozzle, hose spray gun, water spray gun

Garden / Home Use: garden watering, lawn watering, plant watering, flower bed

High-concerned chemical: none

Included / Options: 1pc, 2pcs, hose clamps, extra rubber washers, quick connector set

Origin: Mainland China

Pressure / Build Claim: high pressure, pressure booster, concentrated stream

Spray / Adjustment: adjustable nozzle, twist nozzle, rotary dial, 7 spray patterns


INSTRUCTION SHEET

Heavy Duty Garden Hose Nozzle Spray Gun

Connection: 3/4″ GHT (Standard Garden Hose Thread) · Female Swivel

CONNECT TO HOSE

  1. Make sure the rubber washer is seated flat inside the nozzle's swivel nut.
    (If your unit ships without an extra spare washer pack, there should be one pre-installed—don't double them up.)
  2. Push the hose end straight into the nozzle so it sits flush.
  3. Turn the GHT nut by hand until snug.
    Do NOT use pliers. GHT seals on the rubber washer, not thread torque—over-tightening causes leaks, cracked plastic, or thread damage.
  4. Open the tap slowly and check the joint.
    Still dripping? Close tap → unscrew → check washer isn't flipped, hardened, or sitting crooked → reseat and hand-tighten again.

USE

  1. Open water at the faucet/spigot.
  2. Twist the nozzle head / turn the dial to set spray:
    jet / rinse for reach & wash-down → flat / fan / angle for flush & windows → shower / cone for watering → mist for gentle spray.
  3. Squeeze the trigger to spray.
    If there's a lock clip / buckle, set it only when you want continuous flow; release/unlock before letting go.
  4. When finished: release trigger → close tap → squeeze briefly to drain → unscrew from hose → store dry.

DON'T

  • Never aim at people, pets, eyes, or electrical fixtures.
  • Do not use hot water .
  • Don't leave water-filled under pressure / don't store frozen.

CARE

Wipe exterior after use. If water starts dripping at the connection later in life, replace the rubber washer (standard hose gasket).
Coil hose loosely; avoid sharp kinks at the fitting.

(no separate accessories / no extra parts pack — single hose-end nozzle unit)



Reviews

(No reviews yet) Write a Review