Product Overview
SPECIFICATIONS
Battery Capacity(mAh): 10000-12000
Battery Type: Others
Brand Name: EAFC
Conversion Rate: >90%
External Testing Certification: ce,CCC
Is it with battery: Yes
Number Of Built-in Batteries: 4
Origin: Mainland China
Peak Current: 1200 A
Warm reminder:
The Peak current 1000A is suitable for petrol cars up to 4L
Matters needing attention (buyers must see)
The product has just been received, you must first turn on the flashlight to discharge, and then charge the product for more than 4 hours, and then start the car, because the product is empty. This operation can prolong the service life of the product!
Do not discharge and charge at the same time.
Question1: Why does the battery level always show 0% after I charge it for a long time?
Answer: Due to the long-term power loss of the power supply, the product enters the self-protection mode. Please charge for more than 4 hours. It takes a long time for the power level to go from 0% to 1%. This is normal.
Question2: Why does the battery level show 100% when I turn it on and then turn it back to 0%?
Answer: Same as the above question, at this time you can long press the button to turn on the flashlight discharge mode, turn off the flashlight after a while and then recharge the power supply until it reaches 100%, and perform deep charging and discharging of the product.
? How to Jump Start Your Car:
First Charge - Fully charge for 4+ hours before first use
Connect - Red clamp to battery (+) terminal, black clamp to clean metal ground
Start - Insert connector, turn ignition (max 3 seconds per attempt)
Wait - If unsuccessful, wait 60+ seconds before next try
Disconnect - Remove within 30 seconds after starting
